UnityGame/Library/PackageCache/com.unity.inputsystem/Documentation~/Events.md

uid
input-system-events

Input events

• Types of events
  • State events
  • Device events
  • Text events
• Working with events
  • Listening to events
  • Reading state events
  • Creating events
  • Capturing events
• Processing events
  • Merging of events

The Input System is event-driven. All input is delivered as events, and you can generate custom input by injecting events. You can also observe all source input by listening in on the events flowing through the system.

Note

: Events are an advanced, mostly internal feature of the Input System. Knowledge of the event system is mostly useful if you want to support custom Devices, or change the behavior of existing Devices.

Input events are a low-level mechanism. Usually, you don't need to deal with events if all you want to do is receive input for your app. Events are stored in unmanaged memory buffers and not converted to C# heap objects. The Input System provides wrapper APIs, but unsafe code is required for more involved event manipulations.

Note that there are no routing mechanism. The runtime delivers events straight to the Input System, which then incorporates them directly into the Device state.

Input events are represented by the InputEvent struct. Each event has a set of common properties:

Property	Description
type	FourCC code that indicates what type of event it is.
eventId	Unique numeric ID of the event.
time	Timestamp of when the event was generated. This is on the same timeline as Time.realtimeSinceStartup.
deviceId	ID of the Device that the event targets.
sizeInBytes	Total size of the event in bytes.

You can observe the events received for a specific input device in the input debugger.

Types of events

State events

A state event contains the input state for a Device. The Input System uses these events to feed new input to Devices.

There are two types of state events:

• StateEvent ('STAT')
• DeltaStateEvent ('DLTA')

StateEvent contains a full snapshot of the entire state of a Device in the format specific to that Device. The stateFormat field identifies the type of the data in the event. You can access the raw data using the state pointer and stateSizeInBytes.

A DeltaStateEvent is like a StateEvent, but only contains a partial snapshot of the state of a Device. The Input System usually sends this for Devices that require a large state record, to reduce the amount of memory it needs to update if only some of the Controls change their state. To access the raw data, you can use the deltaState pointer and deltaStateSizeInBytes. The Input System should apply the data to the Device's state at the offset defined by stateOffset.

Device events

Device events indicate a change that is relevant to a Device as a whole. If you're interested in these events, it is usually more convenient to subscribe to the higher-level InputSystem.onDeviceChange event rather then processing InputEvents yourself.

There are three types of Device events:

• DeviceRemoveEvent ('DREM')
• DeviceConfigurationEvent ('DCFG')
• DeviceResetEvent ('DRST')

DeviceRemovedEvent indicates that a Device has been removed or disconnected. To query the device that has been removed, you can use the common deviceId field. This event doesn't have any additional data.

DeviceConfigurationEvent indicates that the configuration of a Device has changed. The meaning of this is Device-specific. This might signal, for example, that the layout used by the keyboard has changed or that, on a console, a gamepad has changed which player ID(s) it is assigned to. You can query the changed device from the common deviceId field. This event doesn't have any additional data.

DeviceResetEvent indicates that a device should get reset. This will trigger InputSystem.ResetDevice to be called on the Device.

Text events

Keyboard devices send these events to handle text input. If you're interested in these events, it's usually more convenient to subscribe to the higher-level callbacks on the Keyboard class rather than processing InputEvents yourself.

There are two types of text events:

• TextEvent ('TEXT')
• IMECompositionEvent ('IMES')

Working with events

Listening to events

If you want to do any monitoring or processing on incoming events yourself, subscribe to the InputSystem.onEvent callback.

InputSystem.onEvent +=
   (eventPtr, device) =>
   {
       Debug.Log($"Received event for {device}");
   };

An IObservable interface is provided to more conveniently process events.

// Wait for first button press on a gamepad.
InputSystem.onEvent
    .ForDevice<Gamepad>()
    .Where(e => e.HasButtonPress())
    .CallOnce(ctrl => Debug.Log($"Button {ctrl} pressed"));

To enumerate the controls that have value changes in an event, you can use InputControlExtensions.EnumerateChangedControls.

InputSystem.onEvent
    .Call(eventPtr =>
    {
        foreach (var control in eventPtr.EnumerateChangedControls())
            Debug.Log($"Control {control} changed value to {control.ReadValueFromEventAsObject(eventPtr)}");
    };

This is significantly more efficient than manually iterating over InputDevice.allControls and reading out the value of each control from the event.

Reading state events

State events contain raw memory snapshots for Devices. As such, interpreting the data in the event requires knowledge about where and how individual state is stored for a given Device.

The easiest way to access state contained in a state event is to rely on the Device that the state is meant for. You can ask any Control to read its value from a given event rather than from its own internally stored state.

For example, the following code demonstrates how to read a value for Gamepad.leftStick from a state event targeted at a Gamepad.

InputSystem.onEvent +=
    (eventPtr, device) =>
    {
        // Ignore anything that isn't a state event.
        if (!eventPtr.IsA<StateEvent>() && !eventPtr.IsA<DeltaStateEvent>())
            return;

        var gamepad = device as Gamepad;
        if (gamepad == null)
        {
            // Event isn't for a gamepad or device ID is no longer valid.
            return;
        }

        var leftStickValue = gamepad.leftStick.ReadValueFromEvent(eventPtr);
    };

Creating events

Anyone can create and queue new input events against any existing Device. Queueing an input event is thread-safe, which means that event generation can happen in background threads.

Note

: Unity allocates limited memory to events that come from background threads. If background threads produce too many events, queueing an event from a thread blocks the thread until the main thread flushes out the background event queue.

Note that queuing an event doesn't immediately consume the event. Event processing happens on the next update (depending on InputSettings.updateMode, it is triggered either manually via InputSystem.Update, or automatically as part of the Player loop).

Sending state events

For Devices that have a corresponding "state struct" describing the state of the device, the easiest way of sending input to the Device is to simply queue instances of those structs:

// Mouse.
InputSystem.QueueStateEvent(Mouse.current, new MouseState { position = new Vector2(123, 234) });

// Keyboard.
InputSystem.QueueStateEvent(Keyboard.current, new KeyboardState(Key.LeftCtrl, Key.A));

Touchscreen is somewhat special in that it expects its input to be in TouchState format.

// Start touch.
InputSystem.QueueStateEvent(Touchscreen.current,
    new TouchState { touchId = 1, phase = TouchPhase.Began, position = new Vector2(123, 234) });

// Move touch.
InputSystem.QueueStateEvent(Touchscreen.current,
    new TouchState { touchId = 1, phase = TouchPhase.Moved, position = new Vector2(234, 345) });

// End touch.
InputSystem.QueueStateEvent(Touchscreen.current,
    new TouchState { touchId = 1, phase = TouchPhase.Ended, position = new Vector2(123, 234) });

IMPORTANT: Touch IDs cannot be 0! A valid touch must have a non-zero touch ID. Concurrent touches must each have a unique ID. After a touch has ended, its ID can be reused – although it is recommended to not do so.

If the exact format of the state used by a given Device is not known, the easiest way to send input to it is to simply create a StateEvent from the Device itself:

// `StateEvent.From` creates a temporary buffer in unmanaged memory that holds
// a state event large enough for the given device and contains a memory
// copy of the device's current state.
InputEventPtr eventPtr;
using (StateEvent.From(myDevice, out eventPtr))
{
    ((AxisControl) myDevice["myControl"]).WriteValueIntoEvent(0.5f, eventPtr);
    InputSystem.QueueEvent(eventPtr);
}

Alternatively, you can send events for individual Controls.

// Send event to update leftStick on the gamepad.
InputSystem.QueueDeltaStateEvent(Gamepad.current.leftStick,
    new Vector2(0.123f, 0.234f);

Note that delta state events only work for Controls that are both byte-aligned and a multiple of 8 bits in size in memory. You can't send a delta state event for a button Control that is stored as a single bit, for example.

Capturing Events

NOTE: To download a sample project which contains a reusable MonoBehaviour called InputRecorder, which can capture and replay input from arbitrary devices, open the Package Manager, select the Input System Package, and choose the sample project "Input Recorder" to download.

You can use the InputEventTrace class to record input events for later processing:

var trace = new InputEventTrace(); // Can also give device ID to only
                                   // trace events for a specific device.

trace.Enable();

//... run stuff

var current = new InputEventPtr();
while (trace.GetNextEvent(ref current))
{
    Debug.Log("Got some event: " + current);
}

// Also supports IEnumerable.
foreach (var eventPtr in trace)
    Debug.Log("Got some event: " + eventPtr);

// Trace consumes unmanaged resources. Make sure to dispose.
trace.Dispose();

Dispose event traces after use, so that they do not leak memory on the unmanaged (C++) memory heap.

You can also write event traces out to files/streams, load them back in, and replay recorded streams.

// Set up a trace with such that it automatically grows in size as needed.
var trace = new InputEventTrace(growBuffer: true);
trace.Enable();

// ... capture some input ...

// Write trace to file.
trace.WriteTo("mytrace.inputtrace.");

// Load trace from same file.
var loadedTrace = InputEventTrace.LoadFrom("mytrace.inputtrace");

You can replay captured traces directly from InputEventTrace instances using the Replay method.

// The Replay method returns a ReplayController that can be used to
// configure and control playback.
var controller = trace.Replay();

// For example, to not replay the events as is but rather create new devices and send
// the events to them, call WithAllDevicesMappedToNewInstances.
controller.WithAllDevicessMappedToNewInstances();

// Replay all frames one by one.
controller.PlayAllFramesOnyByOne();

// Replay events in a way that tries to simulate original event timing.
controller.PlayAllEventsAccordingToTimestamps();

Processing events

Events are collected on a queue by the Unity runtime. This queue is regularly flushed out and the events on it processed. Events can be added to the queue manually by calling InputSystem.QueueEvent.

Each time input is processed, InputSystem.Update is called implicitly by the Unity runtime.

The interval at which this happens is determined by the "Update Mode" configured in the settings. By default, input is processed in each frame before MonoBehaviour.Update methods are called. If the setting is changed to process input in fixed updates, then this changes to input being processed each time before MonoBehaviour.FixedUpdate methods are called.

Normally, when input is processed, all outstanding input events on the queue will be consumed. There are two exceptions to this, however.

When using UpdateMode.ProcessEventsInFixedUpdate, the Input System attempts to associate events with the timeslice of the corresponding FixedUpdate. This is based on the timestamps of the events and a "best effort" at calculating the corresponding timeslice of the current FixedUpdated.

The other exception are BeforeRender updates. These updates are run after fixed or dynamic updates but before rendering and used used exclusively to update devices such as VR headsets that need the most up-to-date tracking data. Other input is not consumed from such updates and these updates are only enabled if such devices are actually present. BeforeRender updates are not considered separate frames as far as input is concerned.

Note

: Manually calling InputSystem.Update is strongly advised against except within tests employing InputTestFixture or when explicitly setting the system to manual update mode.

Methods such as InputAction.WasPerformedThisFrame and InputAction.WasPerformedThisFrame operate implicitly based on the [InputSystem.Update] cadence described above. Meaning, that they refer to the state as per the last fixed/dynamic/manual update happened.

You can query the current/last update type and count from InputState.

Merging of events

Input system uses event mering to reduce amount of events required to be processed. This greatly improves performance when working with high refresh rate devices like 8000 Hz mice, touchscreens and others.

For example let's take a stream of 7 mouse events coming in the same update:

Mouse       Mouse       Mouse       Mouse       Mouse       Mouse       Mouse
Event no1   Event no2   Event no3   Event no4   Event no5   Event no6   Event no7
Time 1      Time 2      Time 3      Time 4      Time 5      Time 6      Time 7
Pos(10,20)  Pos(12,21)  Pos(13,23)  Pos(14,24)  Pos(16,25)  Pos(17,27)  Pos(18,28)
Delta(1,1)  Delta(2,1)  Delta(1,2)  Delta(1,1)  Delta(2,1)  Delta(1,2)  Delta(1,1)
BtnLeft(0)  BtnLeft(0)  BtnLeft(0)  BtnLeft(1)  BtnLeft(1)  BtnLeft(1)  BtnLeft(1)

To reduce workload we can skip events that are not encoding button state changes:

                        Mouse       Mouse                               Mouse
                        Time 3      Time 4                              Time 7
                        Event no3   Event no4                           Event no7
                        Pos(13,23)  Pos(14,24)                          Pos(18,28)
                        Delta(3,3)  Delta(1,1)                          Delta(4,4)
                        BtnLeft(0)  BtnLeft(1)                          BtnLeft(1)

In that case we combine no1, no2, no3 together into no3 and accumulate the delta, then we keep no4 because it stores the transition from button unpressed to button pressed, and it's important to keep the exact timestamp of such transition. Later we combine no5, no6, no7 together into no7 because it is the last event in the update.

Currently this approach is implemented for:

• FastMouse, combines events unless buttons or clickCount differ in MouseState.
• Touchscreen, combines events unless touchId, phaseId or flags differ in TouchState.

You can disable merging of events by:

InputSystem.settings.disableRedundantEventsMerging = true;